- Suitable for SP-03D / 02DV2 Servo
This is a Yokomo SP-03 D Program Card is a drift dedicated servo SP-03D, equipped with a steering hunting suppression function. It also allows the driver to adjust each value of power, torque, hunting suppression, and neutral width. It also realizes a reverse function of servo operation. Although the SP-03D has sufficient performance by default, it can be set in detail to meet the demands of expert drivers who require more delicate operation.
If the driver himself increases the feeling of operation, or if the machine balance is good and there is no need to raise the hunting suppression area, the power and torque can be increased to achieve a more direct operation, or on the contrary. In severe situations such as driving (when you want to increase the gyro gain value, etc.), it is possible to easily extract the steering characteristics according to the situation, such as increasing the hunting suppression value by reducing power and torque.
The main unit is equipped with a servo connection port and a power supply port. The power supply can use a BEC power supply such as ESC or receiver, or it can be connected via a micro USB connector from a PC or mobile battery. A connector cord for BEC power connection is also included.
The program card for the drift servo is now available, which is equipped with a steering hunting suppression function that would further enhances the function of dedicated servo for drifting, which would be essential for RWD drift cars for competition.
The power, torque, hunting suppression, and neutral width values are adjusted to realize the reverse function of servo operation. Although the SP-03D and SP-02DV2 servos have sufficient performance even at default setting, detailed settings that meet the demands of expert drivers for more delicate operation will be possible.
For example, when driver wants to improve the drivability, or when the machine balance is good at hunting suppression area, this card would increase the power and torque to make the feeling more direct, or conversely in severe situations such as running (when you want to increase the gain value of the gyro), you can easily bring out the steering characteristics according to the situation, such as increasing the hunting suppression value by suppressing the power and torque.
The servo shell is equipped with a servo connection port and power port. The power supply can be taken from BEC power supply such as ESC or receiver, or it can be connected with a micro USB connector from a personal computer or mobile battery. A connector cord for connecting the BEC power supply is also included.
Note : Please do not use BEC and USB connector at the same time, since this would damage the circuit in programing card.
- Yokomo SP-03DPC Servo Program Card X 1